[RE-wrenches] demolition hammer drills

[frenergy]

Jay,

         Several years ago I saw a review on 7-8-9 or so Rotary hammers 
(accepts SDS, max bits) in the Journal of Light Construction and their 
top one was the Hitachi DH40MR, so I bought it and have been happy with 
it.  I too thought it was the tool for installing ground rods, they even 
supplied the "bit" for that purpose.  After many drives, I have found 
that nothing beats a hand held sledge hammer though.  I'm glad I got it 
for the many other things it does beautifully.  It came in a hard case 
that holds many bits...have drilled many 1 1/2" holes in concrete, digs 
clay/dirt etc great.

         Living in the bush of NE CA, I usually go to the enemy for 
specialized tools....Amazon.

Bill
Taylorsville


On 1/6/2016 1:29 PM, jay wrote:
> HI All,
>
> Any recommendations for a demo hammer, and where to get.
>
> I don’t use it much, but for digging holes, and installing ground rods.
>
> Standard 15 amp 120v unit.
>
> thanks
>
> jay
>
> peltz power
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>