[RE-wrenches] Wire management dual axis tracker

[Greg]

Mac,  We've always used LFMC because it's flexible, can take heat and 
cold okay and lasts a long time.  Doesn't look that bad either but maybe 
I'm just used to it :>

Best,

Greg Egan
Remote Power Inc.
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 30 Nov 2015 20:21:18 -0700
> From: Mac Lewis <maclewis1 at gmail.com>
> To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
> Subject: [RE-wrenches] Wire management dual axis tracker
> Message-ID:
> 	<CAOABG492-JurMnPp59p0xHWhdvLYukMcz21HujT_hV4WQVpcLw at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hi Wrenches,
>
> I'm looking for advice on the best way(s) to secure PV source circuit
> wiring on a dual axis tracker.  I've never wired one up before and it seems
> tricky.  This particular tracker is 12 modules, 3 strings.  Is it best to
> run a flexible conduit up the pole and leave plenty of excess conduit to
> create large loops that fluctuate in size throughout the day?  What are
> some other ideas?  How do you avoid abrasion over time?
>
> Thanks in advance
>