[RE-wrenches] Sunny Island FSPC

[Glenn Burt]

Again,  conflicting information, as I was told by an SMA trainer that the SI will run the shifted frequency in the opposite direction to allow electronics that use the zero crossing to recover, like clocks.

Sincerely,
Glenn Burt
Sent from my 'smart' phone so please excuse grammar and typos.

-----Original Message-----
From: "Steve Jefferson" <Steve.Jefferson at sma-america.com>
Sent: ‎8/‎5/‎2015 13:05
To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Sunny Island FSPC

The Sunny Island only shifts in the positive direction to limit the Sunny Boys output.

What components are having issues?

You can contact me offline to discuss.

Thanks

SMA America, LLC
Steve Jefferson
Service Line Supervisor
3925 Atherton Ave
Rocklin, CA 95765 - 3714
U.S.A.
Tel:  +1 916 625 3185 (direct)
Fax: +1 916 625 0871
Mobile: +1 916 622 4253
Email: Steve.jefferson at SMA-America.com<mailto:Steve.jefferson at SMA-America.com>
www.SMA-America.com<http://www.sma-america.com/>

[cid:image001.png at 01CF1CFA.FE18BEB0]<http://www.youtube.com/watch?v=yQWzPuyqhzo&feature=youtu.be>

This email and any attachments thereto may contain SMA America, LLC confidential, privileged and private material for the sole use of the intended recipient. Any review, copying, or distribution of this email (or any attachments thereto) by others is strictly prohibited. If you are not the intended recipient, please contact the sender immediately and permanently delete the original and any copies of this email and any attachments thereto. Thank you.


From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Darren Anderson
Sent: Saturday, August 01, 2015 9:45 AM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] Sunny Island FSPC

Anyone know if the Sunny Island's Frequency Shift Power Control only shifts the frequency in the positive direction as indicated in the manual (ex. +1 Hz to 61 Hz for the fAC Start Delta). Or can it also shift the frequency down? I'm getting 59 Hz output on a remote system and it's screwing with some other components.


[The entire original message is not included.]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150805/ab400900/attachment-0002.html>