[RE-wrenches] Sunny Island FSPC

[Tump]

The SI shifts both ways in order to adjust the SB inverters if installed. Output Hzs WILL shift. Turn off your SB inverters and check the hz this should verify your base line hz @60 cycles. please feel free to contact me off list if you need to. Tump
On Aug 1, 2015, at 12:45 PM, Darren Anderson wrote:

> Anyone know if the Sunny Island’s Frequency Shift Power Control only shifts the frequency in the positive direction as indicated in the manual (ex. +1 Hz to 61 Hz for the fAC Start Delta). Or can it also shift the frequency down? I’m getting 59 Hz output on a remote system and it’s screwing with some other components.
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

> Tump at swnl.net               www.SWNL.net
>                 Solarwinds Northernlights       
>        Serving Mid Coast Maine & Northern California
>                          207-832-7574   Cl. 610-517-8401                              
>                               Blair "TUMP" May
>                ********  MAINE'S CHARTER ********
>                       NABCEP    "Certified PV Installer" 
>    
>               ********  MAINE'S CHARTER ********
>                   Trace Xantrex "Certified" Dealer / Installer"
> 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150803/dee3a723/attachment-0003.html>