[RE-wrenches] SnapNrack
August Goers
august at luminalt.com
Fri Jun 26 14:49:35 PDT 2015
Chris,
You are correct – there is just a bonding Unirac mid clamp. The new SM end
clamp is basically the same as the old clamp but now comes preassembled
with little rubberbands to keep it upright when placed on the rail.
Best, August
*From:* RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On
Behalf Of *Christopher Warfel
*Sent:* Friday, June 26, 2015 2:41 PM
*To:* re-wrenches at lists.re-wrenches.org
*Subject:* Re: [RE-wrenches] SnapNrack
Someone in this thread mentioned a Unirac integrated bonding end clamp.
Our supplier has that on the packing slip, but it was still the same end
clamp we always receive. I have checked their website and do not see an
integrated bonding end clamp; just mid clamp. Does Unirac make an
integrated bonding end clamp? Thanks for any help.
Chris
On 6/25/2015 4:13 PM, Jason Szumlanski wrote:
That decision was based on our distribution network offering better pricing
on Unirac, and engineers being comfortable with it. Now with the integrated
grounding from Unirac, I can't see moving away from it again barring a
significant cost benefit. It also stacks and stocks easier than the
Ironridge rails.
On Wed, Jun 24, 2015 at 5:55 PM, Dana Brandt <dana at ecotechenergy.com> wrote:
Hi Jason,
We've used Unirac for years but have been contemplating Ironridge. I'm
curious what your experience was and why you went back to Unirac?
Anyone else have input on best racking systems for flush-mounted
residential systems on comp roof?
Thanks,
Dana
Dana Brandt
Ecotech Energy Systems, LLC
www.ecotechenergy.com
dana at ecotechenergy.com
360.318.7646
On Wed, Feb 5, 2014 at 12:09 PM, Jason Szumlanski <jason at fafcosolar.com>
wrote:
By Snap N Rack, you mean Sun Run...
http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/
I'm curious if these vertical integrators will still make their acquired
brands available to small dealers through distribution. When SolarCity
snatched up Zep, I had concerns about being able to service or add onto
existing Zep systems we installed. That's definitely a concern going
forward, and reason to perhaps stick with the most compatible racking
solutions available. We used IronRidge for a while, which is largely
compatible with Unirac, but now we're back on the Unirac bandwagon.
Interesting times...
Jason Szumlanski
Fafco Solar
On Wed, Feb 5, 2014 at 12:45 PM, Max Balchowsky <max at seesolar.com> wrote:
We have been using Snap N' Rack for a while, Have lots of installs in
Hawaii - so far no problems, I like the convenience of the design for
snapping in the slider nut in mid rail, and also the ability to install the
panels flush with the end of the rails….
Max Balchowsky
Design Engineer
SEE Systems
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810
"Building a Better Future For The Next Generation"
------------------------------
*From:* Allen Frishman <amfrish at aeonsolar.com>
*To:* RE-wrenches <re-wrenches at lists.re-wrenches.org>
*Sent:* Wednesday, February 5, 2014 6:17 AM
*Subject:* Re: [RE-wrenches] SnapNrack
I am curious about the mid clamps on the snapnrack. The flange that rests
on top of the solar panel frame is so small ~ 3/16". Anyone experience
any problems with these failing in a big storm? With solar panel frames
not being square it is nice to have a little extra to grab - I am always
curious as to why these clips are made with such a small area to hold the
panels down.
All feedback on these clips is appreciated.
*Al Frishman*
AeonSolar
*(917) 699-6641 - cell*
*(888) 460-2867*
*www.aeonsolar.com <http://www.aeonsolar.com/>*
On Jun 1, 2013, at 10:41 AM, Max Balchowsky wrote:
Have installed last three systems (35Kw)with snap n rack.
love it....
Max Balchowsky
Design Engineer
SEE Systems
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810
"Building a Better Future For The Next Generation"
------------------------------
*From:* Solarguy <ntrei at 1scom.net>
*To:* 'RE-wrenches' <re-wrenches at lists.re-wrenches.org>
*Sent:* Friday, May 31, 2013 10:11 PM
*Subject:* Re: [RE-wrenches] SnapNrack
The only complaint with the Snapnrack rails is the thin wall can easily be
distorted. This will allow the nut to drop out of its groove. Love the
universal end clamps but have learned to assemble every one to check for
proper fit before getting on the roof.
Jim Duncan
-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org [mailto:
re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Drake
Sent: Friday, May 31, 2013 7:32 PM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] SnapNrack
Hello Wrenches,
How would you rate the SnapNrack mounting systems against Unirac and other
mounting systems?
Thanks,
Drake
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
Preferences
§
1
2
3
4
5
6
7
8
9
0
-
=
Backspace
Tab
q
w
e
r
t
y
u
i
o
p
[
]
Return
capslock
a
s
d
f
g
h
j
k
l
;
'
\
shift
`
z
x
c
v
b
n
m
,
.
/
shift
English
Deutsch
Español
Français
Italiano
Polski
Português
Русский
alt
alt
Preferences
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches at lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
List Address: RE-wrenches at lists.re-wrenches.org
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
www.members.re-wrenches.org
--
Christopher Warfel, President
ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807
401-466-8978
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150626/e314ce72/attachment-0002.html>
More information about the RE-wrenches
mailing list