[RE-wrenches] SnapNrack
Dana
dana at solarwork.com
Wed Jun 24 15:09:14 PDT 2015
After many years of UniRac we switched to SnapnRack. We have never had to wait for product. AEE ships within 48 hours (usually) there are lots of options for different roofs and they all seem to work well. Flush mount rail is the same for ground mount. We have “custom” over engineered racks at 10,000 ft.el., many times that were like doing erector sets on a roof and are so stout that it is wonderful. Service has been excellent with question & suggestions. I am sold can you tell?
Flush mount is a an easy install too check out their online design & components <http://www.snapnrack.com/> www.snapnrack.com/
----------------------------------------------------------------------------
Dana Orzel
Great Solar Works, Inc - NABCEP # 051112-136
E - dana at solarwork.com - Web - solarwork.com
O - 970.626.5253 C - 208.721.7003
"Responsible Technologies for Responsible People since 1988"
P Please consider the environment before printing this email.
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Dana Brandt
Sent: Wednesday, June 24, 2015 3:56 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] SnapNrack
Hi Jason,
We've used Unirac for years but have been contemplating Ironridge. I'm curious what your experience was and why you went back to Unirac?
Anyone else have input on best racking systems for flush-mounted residential systems on comp roof?
Thanks,
Dana
Dana Brandt
Ecotech Energy Systems, LLC
www.ecotechenergy.com
dana at ecotechenergy.com
360.318.7646
On Wed, Feb 5, 2014 at 12:09 PM, Jason Szumlanski <jason at fafcosolar.com> wrote:
By Snap N Rack, you mean Sun Run...
http://cleantechnica.com/2014/02/05/sunrun-acquires-rec-solars-residential-business-aee-solar-snapnrack-means/
I'm curious if these vertical integrators will still make their acquired brands available to small dealers through distribution. When SolarCity snatched up Zep, I had concerns about being able to service or add onto existing Zep systems we installed. That's definitely a concern going forward, and reason to perhaps stick with the most compatible racking solutions available. We used IronRidge for a while, which is largely compatible with Unirac, but now we're back on the Unirac bandwagon.
Interesting times...
Jason Szumlanski
Fafco Solar
<https://wisestamp.appspot.com/pixview.gif?p=chrome&v=3.31.0&t=1391630669252&u=ce9344a8140ce271>
On Wed, Feb 5, 2014 at 12:45 PM, Max Balchowsky <max at seesolar.com> wrote:
We have been using Snap N' Rack for a while, Have lots of installs in Hawaii - so far no problems, I like the convenience of the design for snapping in the slider nut in mid rail, and also the ability to install the panels flush with the end of the rails….
Max Balchowsky
Design Engineer
SEE Systems
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810
"Building a Better Future For The Next Generation"
_____
From: Allen Frishman <amfrish at aeonsolar.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Wednesday, February 5, 2014 6:17 AM
Subject: Re: [RE-wrenches] SnapNrack
I am curious about the mid clamps on the snapnrack. The flange that rests on top of the solar panel frame is so small ~ 3/16". Anyone experience any problems with these failing in a big storm? With solar panel frames not being square it is nice to have a little extra to grab - I am always curious as to why these clips are made with such a small area to hold the panels down.
All feedback on these clips is appreciated.
Al Frishman
AeonSolar
(917) 699-6641 - cell
(888) 460-2867
www.aeonsolar.com <http://www.aeonsolar.com/>
On Jun 1, 2013, at 10:41 AM, Max Balchowsky wrote:
Have installed last three systems (35Kw)with snap n rack.
love it....
Max Balchowsky
Design Engineer
SEE Systems
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810
"Building a Better Future For The Next Generation"
_____
From: Solarguy <ntrei at 1scom.net>
To: 'RE-wrenches' <re-wrenches at lists.re-wrenches.org>
Sent: Friday, May 31, 2013 10:11 PM
Subject: Re: [RE-wrenches] SnapNrack
The only complaint with the Snapnrack rails is the thin wall can easily be distorted. This will allow the nut to drop out of its groove. Love the universal end clamps but have learned to assemble every one to check for proper fit before getting on the roof.
Jim Duncan
-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Drake
Sent: Friday, May 31, 2013 7:32 PM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] SnapNrack
Hello Wrenches,
How would you rate the SnapNrack mounting systems against Unirac and other mounting systems?
Thanks,
Drake
_______________________________________________
List sponsored by Home Power magazine
List Address: <mailto:RE-wrenches at lists.re-wrenches.org> RE-wrenches at lists.re-wrenches.org
Change email address & settings:
<http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
<http://www.re-wrenches.org/etiquette.htm> www.re-wrenches.org/etiquette.htm
Check out participant bios:
<http://www.members.re-wrenches.org/> www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
Preferences
§
1
2
3
4
5
6
7
8
9
0
-
=
Backspace
Tab
q
w
e
r
t
y
u
i
o
p
[
]
Return
capslock
a
s
d
f
g
h
j
k
l
;
'
\
shift
`
z
x
c
v
b
n
m
,
.
/
shift
English
Deutsch
Español
Français
Italiano
Polski
Português
Русский
alt
alt
Preferences
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150624/c9600d8b/attachment-0002.html>
More information about the RE-wrenches
mailing list