[RE-wrenches] Recommendations on diversion load

[jay peltz]

HI All,

You can buy those exact products from Derik at  hipowerhydro.com

He has made a number of upgrades to reduce the bad connection problems and
therefor increase life.

jay



On Sat, Jun 13, 2015 at 8:00 AM, Bob Maynard <gpgridtie at gmail.com> wrote:

> Alternative Power and Machine makes a decent built diversion load.
> http://apmhydro.com/products/
>
> Bob Maynard
>
> On Fri, Jun 12, 2015 at 10:02 PM, Dan Fink <danbob88 at gmail.com> wrote:
>
>> Hi Kevin;
>>  I agree those dump loads were marginal as far as construction and
>> capacity. I believe the actual manufacturer was Missouri Wind and Sun, the
>> HL-75/100  units still show on video on their site. The riveted connections
>> to the resistor lugs were not good, and backside heat problems as you
>> mention, and serious expansion and contraction issues. Now they just sell
>> the resistors, no enclosure. There is a need for a sturdy and reliable
>> product here. Unfortunately getting a UL listing is so expensive.....but
>> that may not be an issue for you out back of beyond Smithers, I know and
>> love the area!
>> The usual DC replacement water heater elements available everywhere have
>> always worked fine for me. Another need for a product is one that also
>>
>
>
>


-- 
Jay Peltz
Peltz Power
jay.peltz at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150613/98902dc4/attachment-0002.html>