[RE-wrenches] Geda Solarlift

[Benn Kilburn]

I made one from the design that was in HomePower a few years back. 
 Actually just in the process of rebuilding the wooden mod holder portion. It still has life left in it but I want to make a couple modifications. 
It has worked great for the past several years. As simple and cheap as it is, not sure if I'd spend the $ on a manufactured one?  

Benn Kilburn
SkyFire Energy Inc. 
780-906-7807


> On Apr 29, 2015, at 3:31 PM, Lou Russo <russo.lou at gmail.com> wrote:
> 
> Wrenches,
> 
> Anybody out there using the GEDA Solarlift (or any other lift for that matter)? If so what is your opinion of it? Setup time seems a little long, but it could easily make up for it in safety and array installation time. Any input is appreciated.  
> 
> Past Wrenches discussions only seem to talk about lifts in general.
> 
> Aloha,
> 
> Lou Russo
> (440) 345 6762
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>