[RE-wrenches] Wire protection for ground mount

[Jason Szumlanski]

What are you screwing the aluminum into? Any chance of getting a picture?



On Fri, Apr 17, 2015 at 9:08 AM, Matt Sherald <matt at getpimby.com> wrote:

> Adam,
>
> I've used aluminum perforated sheet metal in the past.  It matches the
> other aluminum on the ground mount and it can be zipped up with self
> drilling screws.  Looks pretty sharp when it is done - kinda like it was
> meant to be there all along.
>
> -Matt
>
> On Fri, Apr 17, 2015 at 7:20 AM, AE Solar <autonomousenergies at gmail.com>
> wrote:
>
>> Hey Wrenchers,
>>
>> Does anyone have suggestions for netting/protecting wires behind a ground
>> mount (for keeping hands out of there...not animals). I have seen quite a
>> few home-made'ish looking options on systems around here (screwing hardware
>> cloth onto the back of frames/racking, etc) but am looking for a more
>> professional  option....ideally something that is as clean looking as
>> possible. For what its worth the panels will be (4) high in landscape.
>> Thanks for any thoughts.
>>
>> Adam
>>
>> Adam Katzman - Owner/Operator
>> Autonomous Energies
>> 4872 State Route 9G
>> Germantown NY, 12526
>> www.AutonomousEnergies.com <http://www.autonomousenergies.com/>
>> (518) 567-1468
>>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150417/3ecc0b1f/attachment-0002.html>