[RE-wrenches] Heat exchangers

[Chris Mason]

Jay, we build solar pool heaters from PVC mats, I'm sure you have seen them.
https://www.dropbox.com/s/pwk8c1pv3xu1qs0/2015-03-25%2014.56.28.jpg?dl=0

You could put one system on a roof to heat the water and another in the
pool of water, on the bottom, to transfer the heat. The material is
impervious to salt water.
All you would have to do is circulate the water. As it is unglazed, the
systems work best to transfer small temperature differences to large
amounts of water (swimming pools, for example.) But there is no reason it
would not work for other uses.

On Sun, Apr 5, 2015 at 1:50 PM, Jay <jay.peltz at gmail.com> wrote:

> Hi all
>
>
> I'm looking for information on heat exchangers for the following:
>
> Solar thermal connected to a salt water pool.
> Most heat exchangers are designed for hi temp, I'm looking for low temp.
>
> Please respond off site,
>
> Thanks,
>
> Jay
> Peltz power
>
> New email.
> Jay.peltz at gmail.com
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Chris Mason
NABCEP Certified Solar PV Installer™
Solar Design Engineer
Generac Generators Industrial technician

www.cometsolar.com <http://www.cometenergysystems.com>
264.235.5670
869.662.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150406/ca5cdfa6/attachment-0002.html>