[RE-wrenches] follow up

[jay peltz]

Hi All,

I wanted to follow up to a post thread a few weeks ago.
I had a generator/outback radian issue with pulsing LED lights.


I finally was able to get out there.
Once I put the Radian into generator support mode, all the problems went away.
Pretty impressive.  You could watch the input voltage swing around a bit, but the output voltage was totally stable.
All the LED lights worked like they should, the dimmers also.  
Most impressive. 

Much thanks to all the support/design at Outback.

Jay
Peltz power

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150401/07352d9c/attachment-0002.html>