[RE-wrenches] Uni-Solar 68w Laminate panel removal
Larry
larry at starlightsolar.com
Tue Mar 3 17:46:23 PST 2015
Hi Lou,
There should be two screws at the top of the module. Remove these and on
a very hot day you should be able to start at the top edge and peel it
down. Don't hurry. Once started, a heat gun to the bottom will speed it
up. If some stick-um gets left on the roof, you'll need a solvent to
loosen it (can't remember, WD40?).
So, after all that effort you will have a used Uni-Solar 68 Watt PV mod
that is worth about $50 to someone that knows about the performance of
those amazing modules.
Larry Crutcher
Starlight Solar Power Systems
On 3/3/15 4:33 PM, Lou Russo wrote:
> Wrenches,
>
> Has anyone ever removed these from a metal standing seam roof? If so,
> was the module or roof damaged? If not, then is there a market for
> these used panels?
>
> Thanks for any insight.
> Aloha,
>
> Lou Russo
>
>
More information about the RE-wrenches
mailing list