[RE-wrenches] Enphase Gen4 - How Is It Doing?

[Mike Nelson]

I've had a couple of M-215 failures and 1 M-250 failure. Had MANY 190 and 210 failures.

Michael D Nelson
MD Electric & Solar, Inc.
707-684-0064 mobile
707-884-1862 office
www.mdelectricsolar.com
Sent from my iPhone

> On Feb 8, 2015, at 9:14 AM, Mark Frye <markf at berkeleysolar.com> wrote:
> 
> All my M215's are stable in the field. (100% of M190 and M380 replaced at Enphase's cost)
> 
> Anyone using the M250? Any feedback?
> 
> Mark
> 
>> On 2/8/2015 6:46 AM, Jason Szumlanski wrote:
>> M215 failures? I've seen only 1 or 2 out of thousands. The M215 was a remarkable improvement over the M190. Are you having a different experience?
>> 
>> Jason Szumlanski
>> 
>> On Fri, Feb 6, 2015 at 12:56 PM, Mark Frye <markf at berkeleysolar.com> wrote:
>>> Folks,
>>> 
>>> How is the Gen4 Enphase (M250) holding up in the field? Any marked improvement over M215 in terms of failures?
>>> 
>>> Mark Frye
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150208/d8032b8b/attachment-0002.html>