[RE-wrenches] Enphase Gen4 - How Is It Doing?

[penobscotsolar at midmaine.com]

We have 0 M-215 failures out of about 300 installed. Pretty good failure
rate, if I do say so myself....


> M215 failures? I've seen only 1 or 2 out of thousands. The M215 was a
> remarkable improvement over the M190. Are you having a different
> experience?
>
> Jason Szumlanski
>
> On Fri, Feb 6, 2015 at 12:56 PM, Mark Frye <markf at berkeleysolar.com>
> wrote:
>
>> Folks,
>>
>> How is the Gen4 Enphase (M250) holding up in the field? Any marked
>> improvement over M215 in terms of failures?
>>
>> Mark Frye
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
>> org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>