[RE-wrenches] Whisper Controller Conversion

[toddcory at finestplanet.com]

my old whisper controller has 3, full wave bridge rectifiers (with capacitors in parallel) connected to the wild, 3 phase ac input... and a 4 way light switch used to short out the three wild ac legs for the brake. should be easy to build one.
 
todd
 
 
 
 


On Friday, February 6, 2015 4:31pm, "Dan Fink" <danbob88 at gmail.com> said:



Yes, the "EZ-Fire" controller. 
I agree with Roy; there's nothing magic about the turbine alternator itself, and it's easy to build your own stop switch and rectifier/heat sink assembly. And maybe then run it thru a Midnite Classic for MPPT. I've never done it with a 200, but works fine on 100s.




Dan Fink
Buckville Energy
IREC Certified Instructor™ for: 
~ PV Installation Professional
~ Small Wind Installer
NABCEP / IREC / ISPQ Accredited Continuing Education Providers™
970.672.4342




Sent from Finest Planet WebMail.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150206/46be043d/attachment-0002.html>