[RE-wrenches] Remote monitor of an Outback system location
Dana
dana at solarwork.com
Mon Dec 21 06:05:12 PST 2015
Wrenching wizards,
I have a part time occupied clients house at 10,000 elevation that does
not have: cell service, barely texting capability, & a radio based Century
link semi reliable analog phone (as long as the wind is not blowing the
radio antenna around). She does have Hughes-net or equivalent satellite
internet & a 2 year old Outback power system/Mate III with a 20 KW Kohler
generator. During the latest cold snap (-7°) the generator failed to start
as it is in an outdoor unheated garage. LP gas backs up the whole
scenario. Snowmobile is the only access & if it is a snow storm there is a
great chance that you are not getting in or out due to sever drifting.
Q In order to send a low power signal (<23.9 VDC?) or generator failure to
start distress call from the Outback equipment: What is available to
communicate a variety of distress signals via internet?
Can the RE Optics interface perform this task?
I have a local security/alarm company that can provide via router (this
requires AC present though): Low temperature & AC out (but at that point it
is too late the house is on a downhill slide), Low DC & or generator failure
to start would be preferable. The alarm companys connection to the router
can read a closed relay as a command.
Suggestions & what have you used?
Thanks in advance.
----------------------------------------------------------------------------
Dana Orzel
Great Solar Works, Inc - NABCEP # 051112-136
E - dana at solarwork.com - Web - solarwork.com
O - 970.626.5253 C - 208.721.7003
"Responsible Technologies for Responsible People since 1988"
P Please consider the environment before printing this email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20151221/6b258b67/attachment-0002.html>
More information about the RE-wrenches
mailing list