[RE-wrenches] 24V Zephyr Vent Fan from a Magnum MS4024PAE inverter
jay peltz
jay at asis.com
Wed Jan 7 14:26:46 PST 2015
The router version magnum remote has a dry contact relay
ME-RTR
Jay
Peltz power.
> On Jan 7, 2015, at 10:56 AM, Ray Walters <ray at solarray.com> wrote:
>
> The Magnums do not have relays available like the old SWs, but you can run a Zephyr directly from either a Outback FM controller or a Midnite Classic. Both have a controlled 200 mA, 12 output. I've had occasional trouble running the Zephyr because as weird as this sounds: the fan can have a start up surge that exceeds 200 mA. Its like sizing a water pump for mice.....you still have to look at the locked rotor current and surge current. With the Midnite Classic, it will just shut off the 12 v output if it exceeds 200 mA, and it doesn't seem to have an error message or warning.
> You could also use a Simple Switch, or other voltage controlled switching device (C40, Tristar, Solar Converters, etc)
> R.Ray Walters
> CTO, Solarray, Inc
> Nabcep Certified PV Installer,
> Licensed Master Electrician
> Solar Design Engineer
> 303 505-8760
> On 1/7/2015 8:45 AM, Chris Daum wrote:
>> Dear folks:
>>
>> Has anyone hooked up a battery vent fan, being turned on and off using just a Magnum MS4024PAE inverter? Is there some AUX output that can be used?
>>
>> Thanks as always for your help!
>>
>> Chris Daum
>> Oasis Montana Inc.
>> 406-777-4309
>> www.oasismontana.com
>>
>>
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20150107/408787b9/attachment-0001.html>
More information about the RE-wrenches
mailing list