[RE-wrenches] Programmable Battery Charger
jay peltz
jay at asis.com
Mon Dec 15 20:02:33 PST 2014
HI Jerry,
Just a standard bridge rectifier, with correct amp rating.
AC to diode to CC, thats it.
All regulation is via CC.
jay
On Dec 15, 2014, at 7:30 PM, Jerry Shafer wrote:
> Very interesting, what diodes did you use to rectify the AC, it sounds similar to the wind machine designs I have worked with. Do you use a coil to regulate the AC amps to the diodes, it seams like you would need a "throttle control" the current someway besides the diodes them selves or the CC.
> Jerry
>
> On Mon, Dec 15, 2014 at 3:51 PM, jay peltz <jay at asis.com> wrote:
> Hi Kirk,
>
> If you use a 200vdc midnight CC you'll have no issues.
> When you rectify 120vac its up around 166vdc
> ( uses the peak vac which is around 170vac.)
>
> For a 150vdc max controller ( midnite 150) or a 144vdc ( outback FM) then a buck transformer or standard transformer is the trick to reduce the AC and hence the DC for these lower voltage units.
>
> jay
> peltz power
> On Dec 15, 2014, at 5:38 PM, Kirk Herander wrote:
>
>> This has been discussed on this list in years past. It is possible to use an outback charge controller as a battery charger. You need to put the 120 AC into a bridge rectifier, then feed the 120 DC into the controller’s PV input. So you’ll have an 80 amp battery charger.
>>
>> Kirk Herander
>> VT Solar, LLC
>> Proven PV provider since 1991
>> www.vermontsolarnow.com
>> dba Vermont Solar Engineering
>> NABCEPTM Inaugural Certificant
>> VT RE Incentive Program Partner
>> 802.863.1202
>>
>> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Dan Tittmann
>> Sent: Monday, December 15, 2014 8:18 PM
>> To: info at windsine.org; RE-wrenches
>> Subject: Re: [RE-wrenches] Programmable Battery Charger
>>
>> You can manually adjust Iotas with tweaking the potentiomiters while monitoring it with a god volt meter. But no time adjustment.
>> Daniel
>>
>>
>> Daniel Tittmann
>> CTO
>> Greenwired
>> www.greenwired.com
>> daniel at greenwired.com
>> 707-923-2001 (office)
>> 707-206-5088 (Cell)
>>
>> On Mon, Dec 15, 2014 at 4:21 PM, Windsine Inc. <windsine at gmail.com> wrote:
>> Check out Argus Technologies.
>>
>> RoyR
>>
>> On Dec 15, 2014 4:01 PM, "Larry" <larry at starlightsolar.com> wrote:
>> Wrenches,
>>
>> Does anyone know of a 120/12 volt battery charger that can be programmed for absorb and float voltage and time in absorb mode? I have been needing this product for many years but I can only find it in inverters with built in chargers from Magnum, Outback, and Xantrex.
>>
>> --
>> Thank you,
>>
>> Larry Crutcher
>> Starlight Solar Power Systems
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
>>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20141216/da885fdb/attachment-0002.html>
More information about the RE-wrenches
mailing list