[RE-wrenches] Aux Output on Outback Devices

[jay peltz]

Hi William

Page 23 of the VFX manual states " will reset if short circuited, no fusing is required". 

Jay
Peltz power




> On Dec 5, 2014, at 5:01 PM, "William Miller" <william at millersolar.com> wrote:
> 
> Jay:
>  
> I suspect shorting the Aux leads will kill an FX inverter.  We traced the Aux PCB traces to the scorch marks on the control board, so it seemed pretty clear we had tested the scenario.
>  
> William
>  
>  
> <image003.jpg>
> Lic 773985
> millersolar.com
> 805-438-5600
>  
> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of jay peltz
> Sent: Friday, December 05, 2014 4:25 PM
> To: RE-wrenches
> Subject: Re: [RE-wrenches] Aux Output on Outback Devices
>  
> Hi William
>  
> Supposed to be. 
> I've tried them with too large of a relay and wouldn't work ( the relay that is). Dead short would be the same. 
>  
> But i did have a VFX 3648 many years ago that had 48v on the aux output. Stumped the hell out of outback. While talking to tech, they had me short the aux wires, and poof 1 dead inverter. 
>  
> Jay
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20141206/ddfab0d3/attachment-0002.html>