[RE-wrenches] Controlling a Generator without an inverter
William Miller
william at millersolar.com
Sat Nov 8 13:57:07 PST 2014
Drake:
Will the Atkinson manage the generator such that the gen will run long enough for a bulk and absorption cycle? Are the parameters field settable?
William
Miller Solar
> On Nov 8, 2014, at 8:47 AM, Drake <drake.chamberlin at redwoodalliance.org> wrote:
>
> Hi William,
>
> If the Classic won't work, the Atkinson Generator Start Control Module should do the job. It is basically like the old Gen Wiz.
>
> http://www.atkinsonelectronics.com/manufacturing/products/GSCM.asp
>
> Drake
>
> At 03:45 PM 11/7/2014, you wrote:
>> Content-Type: multipart/related;
>> boundary="----=_NextPart_000_00FA_01CFFA88.AA65D390"
>> Content-Language: en-us
>>
>> Friend:
>>
>> I am consulting on an installation without an inverter. We need to start and run a generator to power a Samlex battery charger. We have a Midnite Classic, but in reviewing the manual it is not clear if the unit can be programmed to control a generator sensibly. I have a call into Midnite and am awaiting a reply.
>>
>> Just starting a generator at a certain low voltage point is inadequate. The generator needs to run until bulk and absorption are accomplished.
>>
>> We did connect an Outback MX60 to a Mate without an FX once. The menu structure was very different from any manual but we were able to start a generator remotely with the manual relay settings. I just can’t remember if it is possible to take advantage of all of the AGS features such as multiple start conditions and the absorption timers with a Mate and an FM60.
>>
>> Has anyone addressed this scenario?
>>
>> William
>>
>>
>> <12c773.jpg>
>> Lic 773985
>> millersolar.com
>> 805-438-5600
>>
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>>
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> www.members.re-wrenches.org
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20141108/a67e91a2/attachment-0003.html>
More information about the RE-wrenches
mailing list