[RE-wrenches] Pv wire

[Kirk]

Thanks. I remember it being about .05 or so.

Kirk Herander
VSE

> On Jun 26, 2014, at 1:53 PM, "Daniel Young" <dyoung at dovetailsolar.com> wrote:
> 
> My 2kV PV wire is 0.29"OD, so I use 0.053in^2. It's single layer insulation
> if that helps.
> 
> Daniel Young, 
> NABCEP Certified PV Installation ProfessionalTM: Cert #031508-90
> NABCEP Certified Solar Heating InstallerTM: Cert #SH031409-13
> 
> Lead Systems Designer for:
> 
> www.dovetailsolar.com
> Ph: 740-274-0139
> 
> We’ve completed over 310 renewable energy projects!  Check out a few in our
> photo gallery: 
> http://www.dovetailsolar.com/Our-Work.aspx?path=commercial+-+solar+electric
> This email message and attachments are intended only for the addressee.  It
> may contain information which is legally privileged, confidential and exempt
> from disclosure.  If you are not the intended recipient of this message, you
> may not disclose, print, copy or disseminate this message and/or the
> information contained in the message.  If you have received this message in
> error, please reply and notify the sender (only) and delete this message
> along with any attachments.  Unauthorized interception of this email is a
> violation of criminal laws and laws covering electronic communications
> privacy matters. 
> 
> -----Original Message-----
> From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
> Behalf Of dan at foxfire-energy.com
> Sent: Thursday, June 26, 2014 1:44 PM
> To: RE-wrenches
> Subject: Re: [RE-wrenches] Pv wire
> 
> 
> I got .0437" for RHH-2 with outer jacket in the 2011 code
> 
> -------- Original Message --------
> Subject: [RE-wrenches] Pv wire
> From: "Kirk" <kirk at vtsolar.com>
> Date: Thu, June 26, 2014 1:15 pm
> To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
> 
> Hi folks,
> What is the proper approximate in2  area to use for #10 1kva/2kva  pv wire
> for calculating conduit fill? I'm on a job site and don't have the specs
> with me. Thanks.
> 
> Kirk Herander
> VSE
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 
> 
> 
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2247 / Virus Database: 3955/7239 - Release Date: 06/25/14
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>