[RE-wrenches] Pv wire

[dan at foxfire-energy.com]

I got .0437" for RHH-2 with outer jacket in the 2011 code

-------- Original Message --------
Subject: [RE-wrenches] Pv wire
From: "Kirk" <kirk at vtsolar.com>
Date: Thu, June 26, 2014 1:15 pm
To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>

Hi folks,
What is the proper approximate in2  area to use for #10 1kva/2kva  pv wire for calculating conduit fill? I'm on a job site and don't have the specs with me. Thanks.

Kirk Herander
VSE
_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out or update participant bios:
www.members.re-wrenches.org