[RE-wrenches] PV direct to a 230Vac pump?

[Ray Walters]

The Franklin SolarPak uses a standard AC motor and pump down hole, and a 
special inverter/ controller above ground for array direct operation.
The pump is 3 phase though.  You didn't mention phase, but I'm guessing 
yours is not 3 phase.

R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760

On 6/17/2014 4:32 PM, Jeff Oldham wrote:
> Anyone know of a way to power an AC 230V pump PV direct? 
> AeroVironment's USPC-5000/2000 are no longer made. No, a DC pump will 
> not fulfill this need.
> Thanks
>
>
>
> From the Solar, Wind and Hydro powered office of Jeff 
> Oldham/Regenerative SOLutions
>
> ____________________________________________________________
> Fast, Secure, NetZero 4G Mobile Broadband. Try it. 
> <http://www.netzero.net/?refcd=NZINTISP0512T4GOUT2>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140617/e89f4189/attachment-0002.html>