[RE-wrenches] Cleaning Paint Off Modules

Jerry Shafer jerrysgarage01 at gmail.com
Wed Jun 4 11:18:40 PDT 2014


We have used Windex and a pressure washer, Windex seams to work well hope
its not etching primer that might be  hard to get off but that's mainly
used on gutters and down spouts not wood
Jerry
On Jun 4, 2014 10:31 AM, "Louis Woofenden" <louis at woofenden.net> wrote:

>
> Hi Wrenches,
>
> We have an existing customer who just had their house repainted, and the
> painter oversprayed significantly on a row of modules. I haven't run into
> this particular problem before, and am at a bit of a loss about what to
> recommend to our customer for cleaning up this mess.
>
> Anyone have recommendations of cleaning products or techniques to use that
> won't damage the AR coatings or anything else on the module, yet will
> remove paint? Or for that matter, what to avoid?
>
> Thanks,
>
> Louis Woofenden
>
> Net Zero Solar
> Tucson, AZ
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140604/467071f1/attachment-0004.html>


More information about the RE-wrenches mailing list