[RE-wrenches] Low flow high head pump
William Dorsett
wmdorsett at sbcglobal.net
Tue May 6 18:43:39 PDT 2014
For PV direct from that depth, it's got to be positive displacement...
perhaps a jack pump, though replacing a foot valve could be a big job in
itself. There is the trick of drilling a small hole low on the pipe so while
pumping the volume far more than compensates, but leaves the pipe empty
between pumping.
Bill Dorsett
Manhattan, KS
-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of All Solar,
Inc.
Sent: Tuesday, May 06, 2014 7:08 PM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] Low flow high head pump
Hi all,
Any recommendations for a low flow, high lift pump, PV direct pump.
1 GPM @ 600 ft of head. Maybe a conventional pump on a timer?
Jeremy Rodriguez,
President
All Solar, Inc.
1463 M
Penrose Colorado 81240
719-372-3808 office
719-372-3804 fax
www.asolarelectric.com
Sent by Jeremy's iPhone. Sorry for typos and shorthand!
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
More information about the RE-wrenches
mailing list