[RE-wrenches] Flickering LED lights on and Outback Dual 7248VFXsystem
frenergy
frenergy at psln.com
Mon Jan 6 21:00:12 PST 2014
sorry, in my $.02 worth below I forgot to mention, none of my LEDs are on dimmers. Todd, I have never noticed an issue when using the 2 meter and the LEDs are on. I'll have to keep a keener ear next time.
Bill
----- Original Message -----
From: toddcory at finestplanet.com
To: RE-wrenches
Sent: Monday, January 06, 2014 8:10 PM
Subject: Re: [RE-wrenches] Flickering LED lights on and Outback Dual 7248VFXsystem
the only ones i have on a dimmer are in the bathroom and they flicker. being we are grid tied (GVFX-3648) and the grid is up, i suspect this is because of a bad dimmer/lamp combo.
anyone find the RFI from led lamps a problem? i have to shut all mine off when using the 2 meter ham rig.
todd
On Monday, January 6, 2014 7:56pm, "frenergy" <frenergy at psln.com> said:
Another $.02....
I have 2, FX3524's and 35 KWhrs of HUP's behind them....just cleaned and torqued the terminals/cables. I run 6-7 brands, sizes, styles of LEDS and some of them of them flicker while, in my case, the convection oven is running. It quickly pulses (~10-20 times/second) to maintain a temperature. Fridge is DC. The less expensive off-brand LEDs flicker, the big name brands don't.
Bill
Sent from Finest Planet WebMail.
------------------------------------------------------------------------------
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140106/e9de33b4/attachment-0004.html>
More information about the RE-wrenches
mailing list