[RE-wrenches] SnapNrack

[Max Balchowsky]

We have been using Snap N' Rack for a while, Have lots of installs in Hawaii - so far no problems, I like the convenience of the design for snapping in the slider nut in mid rail, and also the ability to install the panels flush with the end of the rails….
 
Max Balchowsky
Design Engineer
SEE Systems
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810
"Building a Better Future For The Next Generation"



________________________________
 From: Allen Frishman <amfrish at aeonsolar.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org> 
Sent: Wednesday, February 5, 2014 6:17 AM
Subject: Re: [RE-wrenches] SnapNrack
 


I am curious about the mid clamps on the snapnrack.   The flange that rests on top of the solar panel frame is so small ~ 3/16".    Anyone experience any problems with these failing in a big storm?    With solar panel frames not being square it is nice to have a little extra to grab - I am always curious as to why these clips are made with such a small area to hold the panels down.   

All feedback on these clips is appreciated.

Al Frishman
AeonSolar
(917) 699-6641 - cell
(888) 460-2867
www.aeonsolar.com 

On Jun 1, 2013, at 10:41 AM, Max Balchowsky wrote:

Have installed last three systems (35Kw)with snap n rack.
>love it....
> 
>Max Balchowsky
>Design Engineer
>SEE Systems
>1048 Irvine Ave Suite 217
>Newport Beach, Ca. 92660
>760-403-6810
>"Building a Better Future For The Next Generation"
>
>
>
>
>________________________________
> From: Solarguy <ntrei at 1scom.net>
>To: 'RE-wrenches' <re-wrenches at lists.re-wrenches.org> 
>Sent: Friday, May 31, 2013 10:11 PM
>Subject: Re: [RE-wrenches] SnapNrack
> 
>
>
>The only complaint with the Snapnrack rails is the thin wall can easily be distorted. This will allow the nut to drop out of its groove. Love the universal end clamps but have learned to assemble every one to check for proper fit before getting on the roof.
>Jim Duncan
>-----Original Message-----
>From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Drake
>Sent: Friday, May 31, 2013 7:32 PM
>To: re-wrenches at lists.re-wrenches.org
>Subject: [RE-wrenches] SnapNrack
> 
>Hello Wrenches,
> 
>How would you rate the SnapNrack mounting systems against Unirac and other mounting systems?
> 
>Thanks,
> 
>Drake
> 
>_______________________________________________
>List sponsored by Home Power magazine
> 
>List Address: RE-wrenches at lists.re-wrenches.org
> 
>Change email address & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
>List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
> 
>Check out participant bios:
>www.members.re-wrenches.org
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Change email address & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
>
>
>
>Preferences
>§
>1
>2
>3
>4
>5
>6
>7
>8
>9
>0
>-
>=
>Backspace
>Tab
>q
>w
>e
>r
>t
>y
>u
>i
>o
>p
>[
>]
>Return
>capslock
>a
>s
>d
>f
>g
>h
>j
>k
>l
>;
>'
>\
>shift
>`
>z
>x
>c
>v
>b
>n
>m
>,
>.
>/
>shift
>English
>Deutsch
>Español
>Français
>Italiano
>Polski
>Português
>Русский
>alt
>alt
>Preferences_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Change email address & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
>
>

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20140205/8959675e/attachment-0003.html>