[RE-wrenches] Epdm flashing

[Bruce Erickson]

Hi Kris,

The roofing contractor we work with for EDPM can get different boot types, or can get custom boots made for our standoffs. I assume you mean heat-welded boots. 4" Unirac 2 piece aluminum standoffs haven't been a problem. Maybe you need to shop around for a roofer who can get more variety of options for you.

Bruce Erickson
Mendocino Solar Service
PO Box 1252
Mendocino, CA 95460
707-937-1701
707-937-1741 fax
bruce at mendocinosolar.com




On Oct 1, 2013, at 8:49 AM, Kristopher Schmid wrote:

> Hi wrenches,
> 
> I am looking to flash a 1" diameter snapnrack post on a pitched roof covered with black epdm membrane.  The roofing manufacturer has a one size fits all, but its too tall to work well.  Any suggestions would be much appreciated.
> 
> Thanks,
> Kris
> 
> ----------
> Shine On!
> 
> Kris Schmid
> Legacy Solar, LLC
> 864 Clam Falls Trail
> Frederic, WI 54837
> 715-653-4295
> www.legacysolar.com
> NABCEP Certified PV Installer
> Licenced Wisconsin Master Electrician
> BSEE
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131001/43acddbb/attachment-0004.html>