[RE-wrenches] Search mode
Eric.Bentsen at schneider-electric.com
Eric.Bentsen at schneider-electric.com
Mon Sep 9 11:35:23 PDT 2013
Hi Jesse,
With my XW4024, I have (2) GFCI recepticles within 2 ft of the PDP.
I am required to set search to 90W before it enters search mode, but if I
cut the breakers that feed the GFCIs, I can
set search to min value (25W) and it will remain in search mode.
Most folks do not use search because certain loads require continuous AC,
i.e. the clock on your microwave, or a fridge,etc.
The power draw in search is 8W, and no load draw when inverting is approx
25W.
Hope that helps,
Eric
_____________________________________________________________________________________
Eric Bentsen | Schneider Electric | Solar Business | UNITED
STATES | Technical Support Representative
Phone: +(650) 351-8237 ext. 001# |
Email: eric.bentsen at schneider-electric.com | Site:
www.schneider-electric.com/solar | Address: 250 South Vasco Rd.,
Livermore, CA 94551
*** Please consider the environment before printing this e-mail
From:
Jesse Dahl <dahlsolar at gmail.com>
To:
Wrenches <RE-wrenches at lists.re-wrenches.org>
Date:
09/08/2013 03:39 PM
Subject:
[RE-wrenches] Search mode
Sent by:
re-wrenches-bounces at lists.re-wrenches.org
Hello,
A friend of mine in the woods just put in a new xantrax inverter and is
having a search mode problem. They can't get 25W search mode to work and
are stuck with using the 50W setting. So they've had to put a few
incandescents in to make this setting work. His calls to tech support have
been less then helpful.
Advice I can pass on?
Thanks as always!
Jesse
Sent from my iPhone
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
______________________________________________________________________
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130909/f634e015/attachment-0004.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 11065 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130909/f634e015/attachment-0004.jpe>
More information about the RE-wrenches
mailing list