[RE-wrenches] size of Surrette AGM S-460 Stud Terminals?
Bob-O Schultze
bob-o at electronconnection.com
Sun Sep 1 19:33:39 PDT 2013
My experience is that a 5/16" bolt will always work but a 3/8" bolt will be tight. Easy enough to ream out to 3/8". It's only soft lead...
On Sep 1, 2013, at 7:20 PM, RE Ellison wrote:
Most of the ones I have run across are 3/8’s
Bob
From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Greg Egan
Sent: Sunday, September 01, 2013 9:55 PM
To: re-wrenches at lists.re-wrenches.org
Subject: [RE-wrenches] size of Surrette AGM S-460 Stud Terminals?
Wrenches,
I can find a pdf on Surrette's site and many other sites with the specs on the S6-460 AGM but the part showing the size of the terminals is unreadable. It's either 5/16th or 3/8" or some metric equivalent. If anyone knows exactly what it is - I'd like to know. I honestly don't think the info is available unless it's in some restricted area of the Surrette site.
Thanks!
Greg Egan
Nabcep PV Installer Certified
Journeyman Electrician
Remote Power Inc.
--
_______________________________________________
List sponsored by Home Power magazine
List Address: RE-wrenches at lists.re-wrenches.org
Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
www.re-wrenches.org/etiquette.htm
Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130901/5924c9fa/attachment-0004.html>
More information about the RE-wrenches
mailing list