[RE-wrenches] Enphase failures

[Mike Nelson]

Marco ,
Haven't seen any M-215 failures (yet) but have had many, many M-190 and M-210 failures. Haven't seen a 250 yet.

Michael D Nelson
MD Electric & Solar Inc.
707.884.1862 office
707.684.0064 cell
Sent from my iPhone

On Aug 2, 2013, at 7:29 PM, "Marco Mangelsdorf" <marco at pvthawaii.com> wrote:

> What are you all seeing as far as failure rates for the Enphase M215s?
>  
> I’ve got a contractor friend on O’ahu who installed a 60-mod system (using the M215s) and has had failures with nine of the buggers, leading to a rather unhappy homeowner.
>  
> While my contractor friend has had some level of support from our Enphase friends, he has gone back to the site many times and is wondering at what point Enphase would authorize replacing the whole kit and caboodle of all them thar micros.
>  
> Anyone have anything similar happen?
>  
> Finally, are you seeing access yet to the new M250?
>  
> Thanks,
> marco
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130802/319d5e96/attachment-0004.html>