[RE-wrenches] Unknown rail.

[Ray Walters]

Looks like SnapNRack.  Get some new bolt and clamp sets before you start 
loosening anything.  The SS bolts can spall, and the last one we worked 
on, we had to replace 1/3 of the hardware.  We used anti-seize thread 
lubricant and a torque wrench on reinstallation.  SnapN Rack seems 
pretty decent overall, just hard to remove if over torqued.

R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760

On 7/31/2013 2:21 PM, All Solar wrote:
> Can anyone please identify the rail on the photo?
>
> Regards
> Jeremy Rodriguez
> AllSolar
>
>
>
> Sent by Jeremy's iPhone. Sorry for typos and shorthand!
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130731/ea2d6108/attachment-0004.html>