[RE-wrenches] Enphase Wire Management

[Andrew Truitt]

Aaron - Zep makes a bracket for supporting Enphase connectors which is quite robust:

http://www.zepsolar.com/images/files/components/pdf/Enphase-Connector-Bracket-RevD-Writing_CLI.pdf

Of course it is intended for use with Zep compatible modules. 

- Andrew


Sent from my iPhone

On Apr 12, 2013, at 1:02 PM, All Solar <allsolar at scswifi.net> wrote:

> Iron ridge has some wire clips that will also fit Unirac rails
> 
> Sent from Jeremy's IPhone.  Sorry for typos and shorthand!
> 
> On Apr 11, 2013, at 6:52 PM, Aaron Mandelkorn <reosolar at gmail.com> wrote:
> 
>> Just wondering what people like to use for supporting the trunk cable for the enphase 215 inverters.  WIth zipties going brittle after a couple of years aluminum or steel options are what I am more interested in.  I have seen some installs with steel zipties but the sharp edge on them makes me wonder if there is a chance of them cutting into the cable.   I have used 3/8" one hole conduit straps on each side of the trunk cable connector and although this seems quite stout it gets expensive on larger systems.  Any ideas about products out there for supporting the trunk cable for the life of the system?
>>  
>> Aaron Mandelkorn
>> NABCEP Certified PV Installer
>> Renewable Energy Outfitters
>> Box 65 Salida, CO. 81201
>> (970)596-3744
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130412/45dd2bcb/attachment-0004.html>