[RE-wrenches] Enphase Wire Management
Kent Osterberg
kent at coveoregon.com
Fri Apr 12 08:16:17 PDT 2013
Aaron,
It might not work with rails from all manufacturer's but I've found the
cable clips from Enphase to work quite well. See the photo on page 2 of
the Engage cable datasheet
<http://enphase.com/wp-uploads/enphase.com/2011/09/Enphase-Datasheet-Engage-Cable.pdf>.
Kent Osterberg
Blue Mountain Solar, Inc.
www.bluemountainsolar.com
On 4/11/2013 5:52 PM, Aaron Mandelkorn wrote:
> Just wondering what people like to use for supporting the trunk cable
> for the enphase 215 inverters. WIth zipties going brittle after a
> couple of years aluminum or steel options are what I am more
> interested in. I have seen some installs with steel zipties but the
> sharp edge on them makes me wonder if there is a chance of them
> cutting into the cable. I have used 3/8" one hole conduit straps on
> each side of the trunk cable connector and although this seems quite
> stout it gets expensive on larger systems. Any ideas about products
> out there for supporting the trunk cable for the life of the system?
>
> Aaron Mandelkorn
> NABCEP Certified PV Installer
> Renewable Energy Outfitters
> Box 65 Salida, CO. 81201
> (970)596-3744
> reosolar at gmail.com <mailto:reosolar at gmail.com>
> www.reosolar.com <http://www.reosolar.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130412/906f1bfc/attachment-0004.html>
More information about the RE-wrenches
mailing list