[RE-wrenches] Cable tray

[Mark Richardson]

We have had good luck with "Snake Tray"<http://snaketray.com/solar/> from Cable Management Solutions.
Comes in Galv and Stainless, 2" x 2" or 4" x 4"

[NYLE LOGO SMALL]
Mark Richardson
mrichardson at newyorklightenergy.com<mailto:mrichardson at newyorklightenergy.com>

From: re-wrenches-bounces at lists.re-wrenches.org [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Chris Mason
Sent: Sunday, March 24, 2013 8:24 PM
To: RE-wrenches
Subject: Re: [RE-wrenches] Cable tray

We use Cablofil but at $10/ft, it's OK for the inverter area but for large roofs, it is expensive.
On Sun, Mar 24, 2013 at 3:39 PM, Kirk <kirk at vtsolar.com<mailto:kirk at vtsolar.com>> wrote:
I like William Miller's idea of slitting PVC conduit. Must be a little tricky ripping it with a saw. It's fastened to the rails using stainless clamps. There are pictures of it and other good wire mgt. on his website. I have not found a reasonably priced wire tray to attach to the rails. Especially outdoor-rated.

Kirk Herander
VSE

On Mar 24, 2013, at 8:07 AM, Chris Mason <cometenergysystems at gmail.com<mailto:cometenergysystems at gmail.com>> wrote:
I don't want the enclosed type, I am looking for wire tray as we will support the airco pipes and some conduits.
On Sat, Mar 23, 2013 at 9:33 PM, Max Balchowsky <max at seesolar.com<mailto:max at seesolar.com>> wrote:
I don't know your exact application, but I've used Carlon wireways for years. Our application most of the time was to use the 4x4 gutter in lieu of metal gutter under the inverters,disconnects, Panelboards, etc.

http://www.carlonsales.com/wiresafe.php

Max Balchowsky
Design Engineer
SEE Systems
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810<tel:760-403-6810>
"Building a Better Future For The Next Generation"

________________________________
From: Chris Mason <cometenergysystems at gmail.com<mailto:cometenergysystems at gmail.com>>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org<mailto:re-wrenches at lists.re-wrenches.org>>
Sent: Friday, March 22, 2013 12:07 PM
Subject: [RE-wrenches] Cable tray

I'm looking for flat roof cable tray system that is cost effective. We previously used Cablofil and Cablo-port FSL 12" tray but it is very expensive for our current application due to the size of the roof. We need to install about 200' of tray and Cablofil galvanized is eating up the budget. Can anyone recommend a cheaper alternative.

--
Chris Mason


_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>



_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>




--
Chris Mason
President, Comet Systems Ltd
www.cometenergysystems.com<http://www.cometenergysystems.com>
Cell: 264.235.5670<tel:264.235.5670>
Skype: netconcepts
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm<http://www.re-wrenches.org/etiquette.htm>

Check out participant bios:
www.members.re-wrenches.org<http://www.members.re-wrenches.org>




--
Chris Mason
President, Comet Systems Ltd
www.cometenergysystems.com<http://www.cometenergysystems.com>
Cell: 264.235.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130325/a2ffef3a/attachment-0004.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.jpg
Type: image/jpeg
Size: 3802 bytes
Desc: image003.jpg
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130325/a2ffef3a/attachment-0007.jpg>