[RE-wrenches] DC circuit breakers in parallel

[Exeltech]

Use a good "pin" to lock them together.  Make sure they can't
disengage (lock-tite the hardware, etc.) and you're good to go.

Stay warm out there (ha!).

Dan

--- On Wed, 2/27/13, Larry Crutcher, Starlight Solar Power Systems <larry at starlightsolar.com> wrote:

From: Larry Crutcher, Starlight Solar Power Systems <larry at starlightsolar.com>
Subject: Re: [RE-wrenches] DC circuit breakers in parallel
To: "RE-wrenches" <re-wrenches at lists.re-wrenches.org>
Date: Wednesday, February 27, 2013, 2:17 PM

Hi Dan,
NEC does not apply to mobile systems. Thus the reason for asking about "safe and reliable" instead of code compliant. 

Thank you,
Larry CrutcherStarlight Solar Power Systems





On Feb 27, 2013, at 11:56 AM, <dan at foxfire-energy.com> <dan at foxfire-energy.com> wrote:
Check out NEC 240.8
db


Dan Brown
Foxfire Energy Corp.
Renewable Energy Systems
(802)-483-2564
www.Foxfire-Energy.com
NABCEP #092907-44


-----Inline Attachment Follows-----

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130227/5f715216/attachment-0004.html>