[RE-wrenches] Square D Disconnects mounted on the slope of the roof.
Drake
drake.chamberlin at redwoodalliance.org
Sat Nov 9 10:01:33 PST 2013
A NEMA 3R box can be mounted vertically on a sloping roof by
attaching brackets to the sides of the box and leveling the box. The
bracket or L-foot can allow the box to swivel to vertical.
Emacs!
At 09:33 AM 11/8/2013, you wrote:
>Hi Kirpal,
>All Square D safety switches are UL tested in the Vertical position ONLY,
>so if someone is trying to install a switch in any other position other
>than vertical, that will be between them and the inspector. Hope this helps.
>Eric
>_____________________________________________________________________________________
>
>
>Eric Bentsen | Schneider Electric | Solar Business | UNITED
>STATES | Technical Support Representative
>Phone: +(650) 351-8237 ext. 001# |
>Email:
><mailto:eric.bentsen at schneider-electric.com>eric.bentsen at schneider-electric.com
>| Site: www.schneider-electric.com/solar | Address: 250 South
>Vasco Rd., Livermore, CA 94551
>
><www.schneider-electric.htm>
>[]
>
>*** Please consider the environment before printing this e-mail
>
>
>
>From: Kirpal Khalsa <solarworks at gmail.com>
>To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
>Date: 11/07/2013 01:42 PM
>Subject: [RE-wrenches] Square D Disconnects mounted on the slope of the roof.
>Sent by: re-wrenches-bounces at lists.re-wrenches.org
>
>
>
>
>
>Hi Folks!!!
>Anyone aware of minimum slope requirements for Square D 321RB
>disconnects....Can they be mounted on rails parallel to the slope of
>the roof like Outback and Midnite solar combiner boxes(down to a 3/12 pitch)
>I can't seem to find any notes stating the limitations in
>manufacturer documentation...... They are NEMA 3 of course....
>Thanks in advance for any direction you can provide....
>
>Sunny Regards,
>Kirpal Khalsa
>NABCEP Certified PV Installation Professional
>Renewable Energy Systems
><http://www.oregonsolarworks.com/>www.oregonsolarworks.com
>541-218-0201 m
>541-592-3958 o
>
>
>
>
>
>______________________________________________________________________
>This email has been scanned by the Symantec Email Security.cloud service.
>_____________________________________________________________________________________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Change email address & settings:
><http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive:
><http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
><www.re-wrenches.org/etiquette.htm>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
><www.members.re-wrenches.htm>www.members.re-wrenches.org
>
>
>
>
>
>_______________________________________________
>List sponsored by Home Power magazine
>
>List Address: RE-wrenches at lists.re-wrenches.org
>
>Change email address & settings:
>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>List-Archive:
>http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>List rules & etiquette:
>www.re-wrenches.org/etiquette.htm
>
>Check out participant bios:
>www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131109/bceadc56/attachment-0003.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2df42e.jpg
Type: image/jpeg
Size: 20231 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131109/bceadc56/attachment-0012.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 2df46c.jpg
Type: image/jpeg
Size: 11065 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20131109/bceadc56/attachment-0013.jpg>
More information about the RE-wrenches
mailing list