[RE-wrenches] On demand WH
Ray Walters
ray at solarray.com
Sun Sep 29 00:15:31 PDT 2013
If its a Rinai, I measured one once that was 30 watts AC standby, and
jumped a bit higher when firing. It also needed pure sine.
The customer swapped it for a regular hot water tank.
Some Bosches and old Palomas, etc. had either a piezo ignition or pilot,
but took no power.
I'm working on a system with one now that needs 12vdc at about 5 watts.
R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760
On 9/28/2013 9:19 PM, frenergy wrote:
> Off-grid Wrenches,
> I'm working on a load sheet and am having a hard time finding
> standby and while firing electrical usage for a propane-fired on
> demand water heater. Do they some/all have standing pilots, glow
> bars, something else? I'm guessing the standby power needs are very
> low but we all know how even 10-15 watts adds up over 24 hrs when
> you're off-grid.
> If any body has some actual numbers rather than just pdf.specs
> (though manus specs might help some), I would be most grateful.
> Thanks in advance.
> Bill
> Feather River Solar Electric
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130929/885da155/attachment-0003.html>
More information about the RE-wrenches
mailing list