[RE-wrenches] Minimum Lux needed
Kelly Larson
solarwrench at asis.com
Thu Sep 5 09:24:39 PDT 2013
Hi Benn,
It's around 200W per square meter.
Blessings,
Kelly
Kelly Larson
Electrical Engineer
NABCEP Certified Solar PV Installation Professional
ISPQ Master Trainer
CA Electrical Contractor# 868189
SolarKelly.com
On Sep 5, 2013, at 9:06 AM, Benn At DayStarSolar wrote:
> Wrenches,
> I was asked... What is the minimum Lux level required to make usable electricity with a commonly installed monocrystaline PV module.
>
> The question is for the purpose of designing a tracker that will not operate until a particular threshold is reached.
> Thanks,
> benn
> Sent from a 'smart' phone, with touch screen keys. Please excuse shortcuts and typos.
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130905/e6f3d49b/attachment-0003.html>
More information about the RE-wrenches
mailing list