[RE-wrenches] outback fx service work

[Ray Walters]

Take it off the wall, and watch out for the really short wires to the 
fan on the cover you are removing.

R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760

On 6/12/2013 4:16 PM, Todd Cory wrote:
> wrenches,
>
> i have a customer with a failed air (xmfr) temp sensor inside their 
> gvfx3648. when ordering a replacement, i was bitching about having to 
> unwire the unit and remove it from the wall (60 pounds is heavier than 
> it used to be) to accomplish the repair... the tech said most people 
> do these projects with the unit still mounted. i have previously heard 
> this was a huge hassle as the boards do not easily line up when the 
> unit is not flat on its back.
>
> whats the wrench experience? take it off the wall, or do the repair 
> with it still mounted?
>
> thanks,
>
> todd
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130612/eb318d6d/attachment-0003.html>