[RE-wrenches] 24V charging with 60 cell modules

[lance barker]

Mac, I'm not much of a poster, but there is another answer. Although I largely agree with the answers you've gotten, as far as they go, but I use a boost M PPT controller from
http://genasun.com to trickle charge my 36 V Elek track from a pair of Arco modules. It's not adjustable but is marine grade. It wasn't cheap, I had to buy it retail. But it's been doing the job for several years. The company responded to my questions saying this controller is specifically made to charge  24 V,36V,and 48V batteries from a single grid tie module. Lance

On Jun 4, 2013, at 8:04 AM, Mac Lewis <maclewis1 at gmail.com> wrote:

> Hello wrenches,
> 
> Is there a good method to charge 24V battery bank with single 60 cell modules?  Ideally, I'd like to charge a 24 V bank with a Kyocera 245GX-LFB.  However, at NOTC the Vmp is 26.8V.  Any good way to do this?
> 
> Thanks in advance.
> -- 
> 
> 
> 
> Mac Lewis
> 
> "Yo solo sé que no sé nada." -Sócrates
> 
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130604/9cb1ab7d/attachment-0003.html>