[RE-wrenches] torque screwdrivers

Ray Walters ray at solarray.com
Mon Apr 22 13:11:26 PDT 2013


We've used them before, just check the in-lb ratings of the connectors 
you'll use them on.  Ours went to 36in-lb, and for more, we just used 
our torque wrench.  I'm now using powered screw drivers with torque 
settings, and then do a final check with the wrench. 
http://www.milwaukeetool.com/power-tools/cordless/2101-22
It saves my wrist and elbow from tendonitis, which is something we and 
tennis players have to worry about.

R.Ray Walters
CTO, Solarray, Inc
Nabcep Certified PV Installer,
Licensed Master Electrician
Solar Design Engineer
303 505-8760

On 4/22/2013 12:43 PM, Kristopher Schmid wrote:
> Any of you folks using these?
> Any brand recommendations?
> What kind of in-lb range should i be looking for?
>
> Thanks!
>
> -- 
> Shine On!
>
> Kris Schmid
> Legacy Solar, LLC
> 864 Clam Falls Trail
> Frederic, WI 54837
> www.legacysolar.com <http://www.legacysolar.com/>
> 715-653-4295
> NABCEP Certified PV Installer
> Licensed Wisconsin Master Electrician
> BSEE
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130422/66302f1d/attachment-0003.html>


More information about the RE-wrenches mailing list