[RE-wrenches] Modules approved for horizontal mounting
Kent Osterberg
kent at coveoregon.com
Sat Apr 20 22:28:02 PDT 2013
The problem they'll have with a completely flat module is that rain
won't wash the dust off.
Kent Osterberg
Blue Mountain Solar, Inc.
www.bluemountainsolar.com
On 4/20/2013 10:09 PM, Benn Kilburn - DayStar Renewable Energy wrote:
> Carl,
> I realized mis-read/answered your question. I was having a couple
> conversations yesterday about clamping modules on the short side and
> it must have still been on my mind when I read your question.
>
> Either way the answer should still be on the specific module's spec
> sheet or most definitely in the install manual.
> It is usually listed as "max load capacity" or "snow load" and be
> given in pascals.
>
> benn
> DayStar Renewable Energy Inc.
> www.daystarsolar.ca
> 780-906-7807
> Construction Electrician Solar PV Systems Certified
> Certificate # 0007S
> HAVE A SUNNY DAY
>
> From: "Benn @ DayStar" <benn at daystarsolar.ca
> <mailto:benn at daystarsolar.ca>>
> Reply-To: RE-wrenches <re-wrenches at lists.re-wrenches.org
> <mailto:re-wrenches at lists.re-wrenches.org>>
> Date: Friday, April 19, 2013 11:04 PM
> To: RE-wrenches <re-wrenches at lists.re-wrenches.org
> <mailto:re-wrenches at lists.re-wrenches.org>>
> Subject: Re: [RE-wrenches] Modules approved for horizontal mounting
>
> Carl,
> Each specific module install instruction guide should state the
> acceptable mounting attachment points.
>
> benn
> Sent from a 'smart' phone, with touch screen keys. Please excuse
> shortcuts and typos.
>
> On 2013-04-19, at 7:27 PM, Carl Adams <swingjunkie at gmail.com
> <mailto:swingjunkie at gmail.com>> wrote:
>
>> Hello wrenches,
>>
>> I have a request for quote, which shows modules mounted
>> horizontally on a supporting structure. This is being done more
>> for show than production obviously. The approved modules in the
>> bid spec are Sharp, Renesolar, LDK, and Trina.
>>
>> Does anyone know if these modules are approved, by the
>> manufacturer, for flat (horizontal) mounting, or have a good
>> point of contact with any of these manufacturers so I can get a
>> quick answer direct from them? We have a 20 psf design snow load
>> in our area.
>>
>> Cheers
>> Carl Adams
>> SunRock Solar
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130420/51f5c07d/attachment-0003.html>
More information about the RE-wrenches
mailing list