[RE-wrenches] Cable tray

Kirk kirk at vtsolar.com
Sun Mar 24 12:39:04 PDT 2013


I like William Miller's idea of slitting PVC conduit. Must be a little tricky ripping it with a saw. It's fastened to the rails using stainless clamps. There are pictures of it and other good wire mgt. on his website. I have not found a reasonably priced wire tray to attach to the rails. Especially outdoor-rated. 

Kirk Herander
VSE

On Mar 24, 2013, at 8:07 AM, Chris Mason <cometenergysystems at gmail.com> wrote:

> I don't want the enclosed type, I am looking for wire tray as we will support the airco pipes and some conduits.
> 
> On Sat, Mar 23, 2013 at 9:33 PM, Max Balchowsky <max at seesolar.com> wrote:
>> I don't know your exact application, but I've used Carlon wireways for years. Our application most of the time was to use the 4x4 gutter in lieu of metal gutter under the inverters,disconnects, Panelboards, etc.
>> 
>> http://www.carlonsales.com/wiresafe.php
>>  
>> Max Balchowsky
>> Design Engineer
>> SEE Systems
>> 1048 Irvine Ave Suite 217
>> Newport Beach, Ca. 92660
>> 760-403-6810
>> "Building a Better Future For The Next Generation"
>> 
>> From: Chris Mason <cometenergysystems at gmail.com>
>> To: RE-wrenches <re-wrenches at lists.re-wrenches.org> 
>> Sent: Friday, March 22, 2013 12:07 PM
>> Subject: [RE-wrenches] Cable tray
>> 
>> I'm looking for flat roof cable tray system that is cost effective. We previously used Cablofil and Cablo-port FSL 12" tray but it is very expensive for our current application due to the size of the roof. We need to install about 200' of tray and Cablofil galvanized is eating up the budget. Can anyone recommend a cheaper alternative. 
>> 
>> -- 
>> Chris Mason
>> 
>> 
>> _______________________________________________
>> List sponsored by Home Power magazine
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
>> 
>> 
>> 
>> 
>> _______________________________________________
>> List sponsored by Home Power magazine
>> 
>> List Address: RE-wrenches at lists.re-wrenches.org
>> 
>> Change email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> 
>> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> 
>> List rules & etiquette:
>> www.re-wrenches.org/etiquette.htm
>> 
>> Check out participant bios:
>> www.members.re-wrenches.org
> 
> 
> 
> -- 
> Chris Mason
> President, Comet Systems Ltd
> www.cometenergysystems.com
> Cell: 264.235.5670
> Skype: netconcepts
> _______________________________________________
> List sponsored by Home Power magazine
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out participant bios:
> www.members.re-wrenches.org
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130324/7d288b5d/attachment-0003.html>


More information about the RE-wrenches mailing list