[RE-wrenches] Cable tray

[Max Balchowsky]

I don't know your exact application, but I've used Carlon wireways for years. Our application most of the time was to use the 4x4 gutter in lieu of metal gutter under the inverters,disconnects, Panelboards, etc.

http://www.carlonsales.com/wiresafe.php

 
Max Balchowsky
Design Engineer
SEE Systems
1048 Irvine Ave Suite 217
Newport Beach, Ca. 92660
760-403-6810
"Building a Better Future For The Next Generation"



________________________________
 From: Chris Mason <cometenergysystems at gmail.com>
To: RE-wrenches <re-wrenches at lists.re-wrenches.org> 
Sent: Friday, March 22, 2013 12:07 PM
Subject: [RE-wrenches] Cable tray
 

I'm looking for flat roof cable tray system that is cost effective. We previously used Cablofil and Cablo-port FSL 12" tray but it is very expensive for our current application due to the size of the roof. We need to install about 200' of tray and Cablofil galvanized is eating up the budget. Can anyone recommend a cheaper alternative. 

-- 
Chris Mason

_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Change email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130323/0a1fb746/attachment-0003.html>