[RE-wrenches] DC circuit breakers in parallel
Ryan
kb1uas at hotmail.com
Wed Feb 27 08:44:44 PST 2013
Larry
Our 100 amp din rail is essentially 2 breakers in parallel. So in theory
the 2 60 amp breakers "Could" work but. My concern would be that they
may not be tripped at the same time where they are not internally
ganged. I can't say "Go Ahead" but.
Ryan
--
Ryan Stankevitz
Technical Support Manager
MidNite Solar Inc.
ryan at midnitesolar.com
360-403-7207 XT 151
Skype ID ryan.midnite
On 2/27/2013 11:21 AM, Larry Crutcher, Starlight Solar Power Systems wrote:
> We are installing the system today and I only have 60amp in stock.
> Customer lives in CA and is leaving today after the installation.
>
> Larry Crutcher
> Starlight Solar Power Systems
>
>
> On Feb 27, 2013, at 9:17 AM, Jonathan Hill wrote:
>
> Why not use one of Midnite's new 100 amp din breakers?
>
> Jonathan Hill
> Solar applications engineer
> Solar Electric Supply
> 530-559-3781
> solarjon at solarelectricsupply.com <mailto:solarjon at solarelectricsupply.com>
>
>
> On Feb 27, 2013, at 8:06 AM, "Larry Crutcher, Starlight Solar Power
> Systems"<larry at starlightsolar.com <mailto:larry at starlightsolar.com>>
> wrote:
>
>> Hello Wrenches,
>>
>> I am installing a Classic 150 controller in an RV with potential 95
>> amps output at 12 volts. The customer has a Midnite DIN box and wants
>> me to use it for the controller output. I am out of 150VDC breakers
>> but I have two 60 amp breakers. Is it safe and reliable to use the 2
>> breakers in parallel for this purpose? I can pin the two handles
>> together. There will be other circuit protection at the battery.
>>
>> Thank you,
>>
>> Larry Crutcher
>> Starlight Solar Power Systems
>
>
>
>
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130227/7683924d/attachment-0003.html>
More information about the RE-wrenches
mailing list