[RE-wrenches] Insulated cabinet source

Dave Palumbo dave at independentpowerllc.com
Fri Feb 8 10:48:23 PST 2013


Kirk,

A few years ago Jeff Randal at DPW made us a nice cabinet for a single
Fronius inverter. It was not insulated. Maybe they could customize a unit to
your specs?

Dave

-----Original Message-----
From: re-wrenches-bounces at lists.re-wrenches.org
[mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Kirk
Sent: Friday, February 08, 2013 1:38 PM
To: RE-wrenches
Subject: [RE-wrenches] Insulated cabinet source

Hello,
I'm looking to source insulated cabinets, relatively large to house -3-
Fronius 5 Kw inverters. They only have a low operating temp spec of -4F. I
plan to supply min heat using a small resistive element. Long story, but
inverters have to be mounted at the array and I must use Fronius. This is
part of an OEM module evaluation in cold climates. Permitting does not allow
building a shed. Thanks.


Kirk Herander
VSE
_______________________________________________
List sponsored by Home Power magazine

List Address: RE-wrenches at lists.re-wrenches.org

Options & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive:
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org

List rules & etiquette:
www.re-wrenches.org/etiquette.htm

Check out participant bios:
www.members.re-wrenches.org





More information about the RE-wrenches mailing list