[RE-wrenches] mate + flexnet DC

[Phil Undercuffler]

Jay, the flexnet dc requires at least one inverter or charge controller,
plus a hub. The device is powered by the inverter/controller's power
supply.

Phil

On Sunday, January 13, 2013, jay peltz wrote:

> Hi All,
>
> Can you use a Mate 1 with only a flexnet dc?
> IE no hub, or inverter or CC?
>
> thanks,
>
> jay
> peltz power
> _______________________________________________
> List sponsored by Home Power magazine
>
> List Address: RE-wrenches at lists.re-wrenches.org <javascript:;>
>
> Options & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out participant bios:
> www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130113/dcaca378/attachment-0003.html>