[RE-wrenches] SMA E-Panel and Inverter OCPD

[Carl Adams]

Hello Wrenches,

We are installing our first Midnite Solar E-panel for SMA.  The epanel has
a bus bar for landing the inverter  output circuits.  The attached diagram
from Midnite does not include any OCPD in the circuit, but it seems to me
these will be required .  We'll be installing an SMA SB3000TL and SB5000TL.
 Have any of you installed this SMA E-Panel configuration before and if so
how did you handle this piece of it?

Thanks in Advance
Carl Adams
SunRock Solar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130916/8a945129/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: SMA_SINGLE_ACcoupled_GRIDup_SunnyBoy.pdf
Type: application/pdf
Size: 544136 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130916/8a945129/attachment-0005.pdf>