[RE-wrenches] Module holders

[Hilton Dier III]

In a recent discussion of the awkwardness of a PV mounting system I 
described module holders I made. Somebody asked for a photo. I got 
around to taking a picture of them:

http://farm9.staticflickr.com/8326/8403507927_73a23357a8_m.jpg

80-20 and aluminum angle - do it yourself in an hour. I use both under 
one module, then shift them over when the first module is clamped from 
one side. You could cut them out of 3/4" ply for a particular job. I 
like these because they are adjustable.

Hope this helps reduce rooftop profanity for someone.

Hilton

-- 
Hilton Dier III
Renewable Energy Design
Partner, Solar Gain LLC
453 East Hill Rd.
Middlesex, VT 05602

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20130121/c71422f1/attachment-0002.html>